 |
|
 |
Product Menu |
 |
 |
 |
|
Shop with Confidence |
|
|
On Sale |
|
 |
 Check out our new Dummy Security Cameras!
Click Here > |
|
|
 |
|
|
|
 |
 |
 |
|
|
|
 |
|
 |
Motion Activated |
 |
Motion Activated Lights
Give the appearance that you are home even when you aren't. These sensors detect movement and trigger your lights to come on immediately as if you were watching. Use motion sensors on indoor and outdoor lighting, install a new fixture, or try an adapter for a light fixture you already have. |
| Motion Activated Driveway Light |
- Installs in minutes...No wiring needed!
- Plug Receiver into any standard outlet
- Plug lamp you wish to control into the Receiver
- Mount Motion Sensor within operating range
- Weather sealed sensor for long life
- Great for inside or outside security
- Detected motion will signal lamp to turn on.
- Light shuts off 3 or 10 minutes after motion has stopped.
- Controls up to 600W of incandescent lighting
- Compact - Fits neatly against walls or behind furniture
- Indoor use only
- Optional alarm sound
- 100 foot range (homes with aluminum siding may have reduced range when mounting sensor outside
- 140 degree X 60 degree detection zone
- Activation switch allows for day and night operation
- Timer switch allows choices of on-time: 6 seconds, 3 minutes, 10 minutes
- Selectable codes block interference from outside signals
- Bonus Remote Included
- 2 year warranty
- Works with Thomas & Betts, Carlon Products HS2144, HS3620, HS3655 (See Below)
|
Now you can monitor more than just one location. Simply mount motion sensor within 100 feet of receiver- No wiring needed
- Weather sealed for long life
- Dependable - Can be used indoors or outdoors in temperatures of -20F to +120F
- 140 degree X 60 degree detection zone
- Activation switch allows day and night operation
- Selectable codes block interference from outside signals
- Timer switch allows choices of on-time: 6 seconds, 3 minutes, 10 minutes
- Works with Thomas & Betts, Carlon Products HS3605, HS3620, HS3655
- Two Year Warranty
|
| Motion Activated Wall Switch |
Alerts you when someone enters Detection Zone!- Install in Minutes
- Remove the faceplate of the existing wall switch
- Remove the existing wall switch
- Connect power leads to the Receiver wires by twisting the wire nut clockwise over the ends.
- Push all wiring into the outlet box.
- Slide the Control Switch on the Receiver Switch to the "ON" position
- Replace existing faceplate.
- Mount Motion Sensor within operating range
- Lights shut off 3 or 10 minutes after motion has stopped
- Override Feature - Control Switch allows you to turn lights on and leave them on.
- Motion Sensor - 140 degree X 60 degree detection zone
- Can be used indoors or outdoors in temperatures of -20F to + 120F
- Timer switch allows choices of on-time: 6 seconds, 3 minutes, 10 minutes
- Activation switch allows day and night operation
- Bonus remote included
- Works with Thomas & Betts, Carlon Products HS2144, HS3620, HS3655
- 2 year warranty
|
| Motion Activated Security Light |
Alerts you when someone enters Detection Zone! Signal passes through doors, walls and floors!- Install in minutes
- No wiring needed
- Weather sealed sensor for long life
- Great for inside or outside security
- Controls up to 150 watts maximum per lamp holder
- Adjustable lamp holders
- Activates receiver from up to 100 feet away
- Can be used indoors or outdoors in temperatures of -20F to + 120F
- Motion Sensor - 140 degree X 60 degree detection zone
- Timer switch allows choices of on-time: 6 seconds, 3 minutes, 10 minutes
- Activation switch allows day and night operation
- Bonus remote included
- Works with Thomas & Betts, Carlon Products HS2144, HS3620, HS3655
- 2 year warranty
|
| Motion Activated Light Adapter |
Turn an existing light into a motion light quickly and easily! Our Motion Light Adapter screws into the existing lamp and the sensor mounts to the wall. When motion is detected, the light will turn on automatically. Ideal for driveways, porches, or anywhere you want convienient lighting. The sensor comes equipped with two adjustable settings: day/night or night only andone or 10 minutes.- Turns existing light into a motion light
- Installs quickly and easily
- Can control up to 150 watts per socket
- Adjustable settings for one to 10 minutes
- Up to 50' range with 120 degree detection arc
- Optional Add-On Socket Adapter available for a dual spotlight
|
| Motion Activated Light Adapter Expansion |
Easily expand your Dimango Thomas & Betts, Carlon Motion Activated Light Adapter with our Add-On Adapter. Perfect for use with a dual spotlight application. The Add-On Adapter simply plugs into the open jack on the bottom of the sensor unit. It couldn't be easier to expand your HS3100D/HS3110D!- Easily expand your existing Dimango Thomas & Betts, Carlon Motion Sensing Light for dual spotlights
- Easy to install - no wiring necessary
- Controls up to 150 watts per socket
- Available in grey or white
|
|
|
|
|
 |
|
|
